146
Dell PowerConnect 55xx Systems User Guide
•
Shutdown
— Discard the packet from any unlearned source and
shut down the port. Ports remain shutdown until they are
activated, or the switch is reset.
Host Authentication
pages:
The following is an example of the CLI commands:
Table 8-16. Host Authentication CLI Commands
CLI Command
Description
dot1x host-mode {multi-
host|single-host|multi-
sessions}
Allows a single host (client) or multiple
hosts on an IEEE 802.1x-authorized port.
dot1x traps mac-
authentication failure
no dot1x traps mac-
authentication failure
Enables sending traps when a MAC
address is successfully authenticated by
the 802.1X mac-authentication access
control.
Use the no form of this command to
disable the traps.
dot1x traps mac-
authentication success
no dot1x traps mac-
authentication success
Enables sending traps when MAC address
was failed in authentication of the 802.1X
MAC authentication access control.
Use the no form of this command to
disable the traps.
dot1x violation-mode
{
restrict
|
protect
|
shutdown
}
no dot1x violation-mode
Configures the action to be taken, when a
station whose MAC address is not the
supplicant MAC address, attempts to
access the interface.
Use the no form of this command to
return to default.
show dot1x advanced
[
gigabitethernet
|
tengigabite
thernet
]
port-number
]
Displays 802.1x advanced features for the
device or specified interface.
console(config)#
interface
gi1/0/1
console(config-if)#
dot1x host-mode multi-host
console(config-if)#
dot1x host-mode single-host
console(config-if)#
dot1x host-mode multi-sessions
Summary of Contents for POWERCONNECT 5524
Page 415: ...Dell PowerConnect 55xx Systems User Guide 415 ...
Page 728: ......
