Dell POWERCONNECT 5524 User Manual Download

Page: 696 / 728

696

Dell PowerConnect 55xx Systems User Guide

Authentication Profiles

Sets of rules which that enables login to and authentication of users and

applications.

Auto-negotiation

Allows 10/100 Mpbs or 10/100/1000 Mbps Ethernet ports to establish for the

following features:

• Duplex/Half Duplex mode
• Flow Control
• Speed

Back Pressure

A mechanism used with Half Duplex mode that enables a port not to receive

a message.
Backplane
The main BUS that carries information in the switch module.

Backup Configuration Files

Contains a backup copy of the switch module configuration. The Backup file

changes when the Running Configuration file or the Startup Configuration

file is copied to the Backup file.

Bandwidth

Bandwidth specifies the amount of data that can be transmitted in a fixed

amount of time. For digital switch modules, bandwidth is defined in Bits per

Second (bps) or Bytes per Second.

Bandwidth Assignments

The amount of bandwidth assigned to a specific application, user, or

interface.

Baud

The number of signaling elements transmitted each second.

Best Effort

Traffic is assigned to the lowest priority queue, and packet delivery is not

guaranteed.

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands