Dell POWERCONNECT 5524, User Manual

Page: 649 / 728

Dell PowerConnect 55xx Systems User Guide
649
– Scheduling WRR Weight — If WRR is selected, enter the WRR
weight assigned to the queue.
– % of WRR Bandwidth — Displays the amount of bandwidth assigned
to the queue. These values represent the percent of the WRR weight.
Configuring Queue Settings Using CLI Commands
The following table summarizes the CLI commands for configuring fields in
the
Queue
page.
The following is an example of the CLI commands:
Mapping to Queue
This section provides information for mapping DSCP and CoS values to
service queues, and contains the following topics:
• CoS to Queue
• DSCP to Queue
Table 22-3. Queue Setting CLI Commands
CLI Command Description
priority-queue out num-of-
queues number-of-queues
no priority-queue out num-
of-queues
Configures the number of expedite
queues.
Use the no form of this command to
restore the default configuration.
wrr-queue bandwidth weight1
weight2 ... weight_n
no wrr-queue bandwidth
Assigns WRR weights to egress queues.
Use the no form of this command to
restore the default configuration.
console(config)# priority-queue out num-of-queues 2
console(config-if)# wrr-queue bandwidth 6 6 6 6 6 6