Dell POWERCONNECT 5524 User Manual Download

Page: 87 / 728

Dell PowerConnect 55xx Systems User Guide

Using the Switch Administrator Buttons

This section describes the buttons found on the OpenManage Switch

Administrator interface.

Information Buttons

Table 9-2 describes the information buttons that provide access to online

support and online help, as well as information about the OpenManage

Switch Administrator interfaces. These are displayed at the top of each page.

Device Management Icons

Table 9-3 describes the device management buttons.

Table 7-2. Information Buttons

Button Description

Support

Opens the Dell Support page at

support.dell.com

About

ontains the version and build number and Dell copyright

information.

Logout

Opens the Log Out window.

Table 7-3. Device Management Icons

Button

Icon

Description

Apply&Save

Saves changes to the Running and Startup Configuration

files.

Help

Open online help. The online help pages are

context-sensitive. For example, if the

IP Addressing

page is

open, the help topic for that page is displayed when

Help

clicked.

Print

Prints the

Network Management System

page and/or table

information.

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands