Dell POWERCONNECT 5524 User Manual Download

Page: 292 / 728

292

Dell PowerConnect 55xx Systems User Guide

Enter the fields:
–

DHCP Server Status

— Enable/disable the ability of the device to

function as a DHCP server.

–

DHCP Ping

— Enable/disable the DHCP server to ping the offered

IP address before responding to a client request.

–

DHCP Ping Retries

— Enter the number of pings that are sent before

discarding an IP address.

Use Default

reverts to the default Ping

Retries setting.

–

DHCP Ping Timeout

— Enter the maximum time interval (in

milliseconds) that the DHCP server waits for a ping reply.

Use Default

reverts to the default Ping Timeout.

Defining DHCP Server Using CLI Commands

The following table summarizes the CLI commands for defining the switch as

a DHCP server.

Table 9-52. DHCP Server CLI Commands

CLI Command

Description

ip dhcp server

no ip dhcp server

Enables the DHCP server feature on

the device.
Use the no form of this command to

disable the DHCP server feature.

ip dhcp ping enable

no ip dhcp ping enable

Enables the DHCP server to send ping

packets before assigning the address to a

requesting client.
Use the no form of this command to

prevent the server from pinging pool

addresses.

ip dhcp ping

count

number

no ip dhcp ping count

Specifies the number of packets a

DHCP server sends to a pool address as

part of a ping operation.
Use the no form of this command to

restore the default configuration.

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands