Dell POWERCONNECT 5524 User Manual Download

Page: 466 / 728

466

Dell PowerConnect 55xx Systems User Guide

–

— Tagged. The interface is a member of a VLAN. All packets

forwarded by the interface are tagged. The packets contain VLAN

information.

–

— Untagged. The interface is a member of a VLAN. Packets

forwarded by the interface are untagged.

–

— Forbidden. The interface is denied membership to a VLAN.

–

Blank

— The interface is not a VLAN member. Packets associated

with the interface are not forwarded.

Enter the fields:
–

Show VLAN

— Check one of the possible options:

•

VLAN ID

— Check VLAN ID, and select a VLAN ID to view.

•

VLAN Name

— Check VLAN Name, and select a VLAN ID to

view.

–

VLAN Name (0-32 Characters)

— Enter a new VLAN name.

–

Status

— The VLAN type. Possible values are:

•

Dynamic

— The VLAN was dynamically created through GVRP.

•

Static

— The VLAN is user-defined.

–

Authentication Not Required

— Enable/disable authentication on

the VLAN.

To define a new VLAN, click

ADD

, and enter the fields. The fields in this

page are described above.

Defining VLAN Membership Using CLI Commands

The following table summarizes the CLI commands for defining VLAN

membership as displayed in the

VLAN Membership

pages.

Table 14-1. VLAN Membership CLI Commands

CLI Command

Description

vlan database

Enters the VLAN configuration mode.

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands