Dell POWERCONNECT 5524 User Manual Download

Page: 349 / 728

Dell PowerConnect 55xx Systems User Guide

349

–

Destination File Name

— The destination file to which the

configuration file is downloaded. The possible options are:
•

Running Configuration

— Check to download commands into

the Running Configuration file. The current file is overwritten.

•

Startup Configuration —

Check to download commands into the

Startup Configuration file. The current file is overwritten.

•

New File Name (1-64 characters)

— Check to download

commands into a configuration backup file. Enter the filename.

Click

Activate

to start the download process.

Downloading Files Using CLI Commands

The following table summarizes the CLI commands for setting fields

displayed in the

File Download

page.

The following is an example of the CLI command:

NOTE:

Each exclamation mark (!) indicates that ten packets were successfully

transferred.

File Upload

Software and configuration files can be uploaded to an external device.

• To upload from a USB port or when management computer uses HTTP
• To upload a file or image using TFTP

Table 9-64. File Download CLI Commands

CLI Command

Description

copy

source-url destination-

url

Copies files from a source to a

destination.

console#

copy tftp:

//10.6.6.64/pp.txt

startup-config

....!

Copy: 575 bytes copied in 00:00:06 [hh:mm:ss]

01-Jan-2000 06:41:55 %COPY-W-TRAP:

The copy operation was completed successfully

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands