Dell POWERCONNECT 5524 User Manual Download

Page: 565 / 728

Dell PowerConnect 55xx Systems User Guide

565

DHCPOFFER

Filter.

Forward the packet

according to DHCP

information. If the

destination address is

unknown the packet is

filtered.

DHCPREQUEST

Forward to trusted

interfaces only.

Forward to trusted

interfaces only.

DHCPACK

Filter.

Same as DHCPOFFER

and an entry is added to

the Binding database.

DHCPNAK

Filter.

Same as DHCPOFFER.

Remove entry if exists.

DHCPDECLINE

Check if there is

information in the

database. If the

information exists and

does not match the

interface on which the

message was received, the

packet is filtered.

Otherwise the packet is

forwarded to trusted

interfaces only, and the

entry is removed from

database.

Forward to trusted

interfaces only

DHCPRELEASE

Same as

DHCPDECLINE.

Same as

DHCPDECLINE.

DHCPINFORM

Forward to trusted

interfaces only.

Forward to trusted

interfaces only.

DHCPLEASEQUERY

Filtered.

Forward.

Table 19-1. DHCP Packet Handling when DHCP Snooping is Enabled (Continued)

Packet Type

Arriving from Untrusted
Ingress Interface

Arriving from Trusted
Ingress Interface

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands