Dell PowerConnect 55xx Systems User Guide
515
Managing Bridge Multicast Groups Using CLI Commands
The following table summarizes the CLI commands for managing Multicast
service members as displayed in the
Bridge Multicast Group
pages.
The following is an example of the CLI commands:
Table 16-3. Bridge Multicast Group CLI Commands
CLI Command
Description
bridge multicast address
{
mac-
multicast-address|ip-multicast-
address
}
no bridge multicast filtering
Registers MAC-layer Multicast
addresses to the bridge table, and
adds static ports to the group.
Use the no form of this command to
disable Multicast address filtering.
bridge multicast forbidden
address
{
mac-multicast-
address|ip-multicast-
address
}[
add
|
remove
]
{
[gigabitethernet|tengigabitethe
rnet] interface-list
|
port-
channel
LAG-number-list
}
no bridge multicast forbidden
address
{
mac-multicast-address
}
Forbids adding a specific Multicast
address to specific ports. Use the no
form of this command to return to
default
Use the no form of this command to
restore the default configuration.
show bridge multicast
address-
table
[
vlan
vlan-
id] [
address
{
mac-multicast-address
|
ip-
multicast-address
}
]
[
format
ip
|
mac
]
Displays Multicast MAC address
table information.
console(config-if)#
bridge multicast address
0100.5e02.0203
add gi
1/0/11,gi1/0/12
console(config-if)#
end
console #
show bridge multicast address-table
VLAN
MAC Address
Type
Ports
----
-----------
-----
----------
1
0100.5e02.0203
static
gi1/0/11,
gigi1/0/12
Forbidden ports for multicast addresses:
Summary of Contents for POWERCONNECT 5524
Page 415: ...Dell PowerConnect 55xx Systems User Guide 415 ...
Page 728: ......
