Dell POWERCONNECT 5524 User Manual Download

Page: 526 / 728

526

Dell PowerConnect 55xx Systems User Guide

The action for each port is displayed.

To modify the forwarding action for an interface, click

Edit,

and enter the

fields.
•

Interface

— Select a port or LAG.

•

Unregistered Multicast

— Select the forwarding status of the selected

interface. The possible options are:
•

Forwarding

— Enables forwarding of unregistered Multicast

frames on the selected port or port-channel.

•

Filtering

— Enables filtering of unregistered Multicast frames on

the selected VLAN interface.

Configuring Unregistered Multicast Using CLI Commands

The following table summarizes the CLI commands for configuring

Unregistered Multicast on the device:

The following is an example of the CLI commands:

Table 16-6. Unregistered Multicast CLI Commands

CLI Command

Description

bridge multicast unregistered

Configures the forwarding state of

unregistered multicast addresses.

show bridge multicast unregistered

Displays the unregistered multicast

filtering configuration.

console #

show bridge multicast unregistered

Port Unregistered

-------

--------

gi1/0/1 Forward

gi1/0/2

Filter

gi1/0/3

Filter

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands