Dell POWERCONNECT 5524 User Manual Download

Page: 468 / 728

468

Dell PowerConnect 55xx Systems User Guide

Port Settings

After a VLAN has been defined, assign ports to it.
To assign a VLAN to untagged packets, arriving on the device, enter the port

default VLAN ID (PVID). All untagged packets arriving to the device are

tagged by the ports PVID.
All ports must have a defined PVID. If no other value is configured, the

default VLAN PVID is used. VLAN ID #1 is the default VLAN, and cannot

be deleted from the system.
To configure ports on a VLAN:

Click

Switching

VLAN

Port Settings

in the tree view to display the

Port Settings: Summary

page.

Figure 14-3. Port Settings: Summary

All interfaces on the selected unit and their settings are displayed.

To modify the port settings, click

Edit,

and enter the fields:

–

Interface

— Enter the unit/port number to be modified.

–

Switchport Mode

— Select whether the port is in Layer 2 or Layer 3.

If the port is in Layer 2, enter the parameters described below,

otherwise the fields are not relevant.

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands