Dell POWERCONNECT 5524 User Manual Download

Page: 179 / 728

Dell PowerConnect 55xx Systems User Guide

179

–

Trusted Key

— Check to specify that the encryption key is used to

authenticate the (Unicast) SNTP server. If this is not checked, the

key is not used for authentication (and another key(s) is used).

Defining SNTP Authentication Settings Using CLI Commands

The following table summarizes the CLI commands for setting fields

displayed in the

SNTP Authentication

pages.

The following is an example of the CLI commands:

Table 9-9. SNTP Authentication CLI Commands

CLI Command

Description

sntp authenticate

no sntp authenticate

Defines authentication for received SNTP

traffic from servers.
Use the no form of this command to disable

the feature.

sntp trusted-key

ey-

number

no sntp trusted-key

key-

number

Authenticates the identity of a system to

which SNTP will synchronize.
Use the no form of this command to disable

system identity authentication.

sntp authentication-key

key-number md5 valu

no sntp authentication-

key key-number

Defines an authentication key for SNTP.
Use the no form of this command to remove

the authentication key for SNTP.

console(config)#

sntp authenticate

console(config)#

sntp trusted-key

console(config)#

sntp authentication-key

md5

Clkkey

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands