286
Dell PowerConnect 55xx Systems User Guide
–
Source IPv6 Address
— The source IP v6 address that is used for
communication with RADIUS servers.
3
To add a RADIUS server, click
Add
, and enter the fields:
–
Supported IP Format
— Select whether the IPv4 or IPv6 format is
supported.
–
IP Address
— Enter the RADIUS server IP address.
–
Priority (0-65535)
— Enter the priority of the authentication server
being added. 0 is the highest value. This is used to configure the order
in which servers are queried.
–
Authentication Port (0-65535)
— Enter the authentication port used
to verify the RADIUS server authentication. Enter 0 if you do not
want this server to be used for authentication purposes.
–
Accounting Port (0-65535)
— Enter the accounting port, which is the
UDP port number of the RADUS server used for accounting requests.
Enter 0 if you do not want this server to be used for accounting
purposes.
–
Usage Type
— Enter the RADIUS server usage. The possible options
are:
•
Login
— Used for login authentication and/or accounting.
•
802.1x
— Used for 802.1x authentication and/or accounting.
•
All
— Used for all types of authentication and/or accounting.
4
Enter the following fields if you do not want to use the default values
entered in the
RADIUS: Summary
page. If you do want to use the default
values, check
Use Default
for these fields.
–
Number of Retries (1-10)
— Enter the number of requests sent to the
RADIUS server before a failure occurs.
–
Timeout for Reply (1-30
) — The amount of the time in seconds that
the device waits for an answer from the RADIUS server before retrying
the query, or switching to the next server.
–
Dead Time (0-2000)
— The amount of time (in minutes) that a
RADIUS server is bypassed for service requests.
–
Key String (0-128 Characters)
— The key string used for
authenticating and encrypting all RADIUS communications between
the device and the RADIUS server.
Summary of Contents for POWERCONNECT 5524
Page 415: ...Dell PowerConnect 55xx Systems User Guide 415 ...
Page 728: ......
