Dell POWERCONNECT 5524 User Manual Download

Page: 357 / 728

Dell PowerConnect 55xx Systems User Guide

357

–

Destination Unit

— Check to copy the firmware to either the Backup

Master unit or all units in the stack.

To copy the Running Configuration file of the Master unit to the Startup

Configuration file of the Master unit or vice versa, select

Copy

Configuration Firmware

and enter the options:

–

Source

— Select either the Running Configuration or the Startup

Configuration file.

–

Destination

— Select either the Running Configuration, Startup

Configuration file or user-created flash files, depending on the source

configuration file.

or
–

New File Name (1-64 characters)

— To copy the source file to a

user-named file, enter the name of a file. If this option is selected,

check where the file is stored:

Flash

USB

Select

Restore Configuration Factory Defaults

to replace the current

configuration settings by the factory configuration default settings.

Click

Activate

to initiate the selected process.

Copying Files Using CLI Commands

The following table summarizes the CLI commands for performing actions

provided by the

Copy Files

page.

Table 9-67. Copy Files CLI Commands

CLI Command

Description

copy source-url destination-url

Copies any file from a source to a

destination.

delete startup-config

Deletes the startup-config file.

delete

url

Deletes a file from the FLASH

memory device.

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands