Dell POWERCONNECT 5524 User Manual Download

Page: 342 / 728

342

Dell PowerConnect 55xx Systems User Guide

The auto-update-configuration options are displayed.

Modify the auto-update configuration parameters as required:
–

Configuration Auto-Config (boot host auto-config)

— Enable/disable

automatic download of the configuration parameters to the Running

Configuration file. By default, this occurs only if the Startup

Configuration file is empty.

–

Firmware Auto-Update (boot host auto-update)

— Enable/disable

automatic download of the image file.

–

Force Configuration Download at Next Startup (boot host dhcp)

—

Enable/disable the

Configuration Auto Update

option to work even if

the Startup Configuration file is not empty.

–

Auto-Copy Running Configuration to Startup Configuration After

Download (boot host auto-save)

— Enable/disable the Running

Configuration file to be automatically copied to the Startup

Configuration file after downloading the Running Configuration file.

Auto Update Configuration Using CLI Commands

The following table summarizes the CLI commands for setting fields

displayed in the

Auto Update of Configuration/Image File

page.

Table 9-63. Auto Update of Configuration/Image File CLI Commands

CLI Command

Description

boot host auto-config

no boot host auto-config

Enables the support of auto-

configuration via DHCP.
Use the no form of this command to

disable DHCP auto configuration.

boot host auto-update

no boot host auto-update

Enables the support of auto-update via

DHCP.
Use the no form of this command to

disable DHCP auto configuration

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands