Dell POWERCONNECT 5524 User Manual Download

Page: 196 / 728

196

Dell PowerConnect 55xx Systems User Guide

Displaying the Log File Table Using the CLI Commands

The following table summarizes the CLI commands for setting fields

displayed in the

Log File

page.

The following is an example of the CLI commands:

Login History

Use the

Login History

page to monitor users, including the time a user

logged in, and the protocol used to log on to the device.

Table 9-15. Log File Table CLI Commands

CLI Command

Description

show logging file

Displays the logging state and the SYSLOG

messages stored in the logging file.

console#

show logging file

Logging is enabled.

Console Logging: Level info. Console Messages: 0 Dropped.

Buffer Logging: Level info. Buffer Messages: 62 Logged, 62

Displayed, 200 Max.

File Logging: Level debug. File Messages: 11 Logged, 51

Dropped.

SysLog server 1.1.1.1 Logging: info. Messages: 0 Dropped.

01-Jan-2000 01:12:01 :%COPY-W-TRAP: The copy operation was

completed successfully

01-Oct-2010 01:11:49 :%LINK-I-Up: gi/1/0/11

01-Oct-2010 01:11:46 :%LINK-I-Up: gi/1/0/12

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands