Dell POWERCONNECT 5524 User Manual Download

Page: 496 / 728

496

Dell PowerConnect 55xx Systems User Guide

•

None

— Disables the selected port/LAG on the Voice VLAN. This

is the default.

•

Static

— Statically adds the port to the Voice VLAN. This is

usually done for VoIP uplink ports that connect the device to VoIP

PBX, for example.

•

Auto

— Indicates that if traffic with an IP phone MAC address is

transmitted on the port/LAG, the port/LAG joins the Voice

VLAN. The port/LAG is aged out of the voice VLAN if the IP

phone’s MAC address (with an OUI prefix) is aged out. If the

MAC address of the IP phones OUI was added manually to a

port/LAG in the voice VLAN, the user cannot add it to the Voice

VLAN in Auto mode, only in Static mode.

–

Voice VLAN Security

— Enable/disable security on the interface.

Security ensures that packets arriving with an unrecognized OUI are

dropped (for example data packets).

Defining Voice VLAN Port Settings Using CLI Commands

The following table summarizes the CLI command for defining

Voice VLAN

port settings

Table 14-8.

Voice VLAN Port Settings

CLI Commands

CLI Command

Description

voice vlan enable

no voice vlan enable

Enables automatic voice VLAN

configuration on a port.
Use the no form of this command to disable

automatic voice VLAN configuration on a

port.

voice vlan secure

no voice vlan secure

Configures secure mode for the voice VLAN.
Use the no form of this command to disable

secure mode.

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands