Dell POWERCONNECT 5524 User Manual Download

Page: 698 / 728

698

Dell PowerConnect 55xx Systems User Guide

Class of Service (CoS).

Class of Service is the 802.1p priority scheme. CoS

provides a method for tagging packets with priority information. A CoS value

between 0-7 is added to the Layer II header of packets, where zero is the

lowest priority and seven is the highest.
A overlapping transmission of two or more packets that collide. The data

transmitted cannot be used, and the session is restarted.

CLI

Command Line Interface

. A set of line commands used to configure the

system. For more information on using the CLI, see

Using the CLI

Communities

Specifies a group of users which retains the same system access rights.

CPU

Central Processing Unit

. The part of a computer that processes information.

CPUs are composed of a control unit and an ALU.

DHCP Client

A device using DHCP to obtain configuration parameters, such as a network

address.

DHCP Snooping

DHCP Snooping expands network security by providing firewall security

between untrusted interfaces and DHCP servers.

DSCP

DiffServe Code Point (DSCP)

. DSCP provides a method of tagging IP

packets with QoS priority information.

Domain

A group of computers and devices on a network that are grouped with

common rules and procedures.

Duplex Mode

Permits simultaneous transmissions and reception of data. There are two

different types of duplex mode:

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands