manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 32 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 32

2

Logging in to iDRAC

You can log in to iDRAC as an iDRAC user, as a Microsoft Active Directory user, or as a Lightweight Directory Access Protocol 
(LDAP) user. The default user name is 

root 

and the default password is 

calvin

. You can also log in using Single Sign-On or 

Smart Card.

NOTE: 

•

You must have Login to iDRAC privilege to log in to iDRAC.

•

iDRAC GUI does not support browser buttons such as 

Back

, 

Forward

, or 

Refresh

.

NOTE: For information on recommended characters for user names and passwords, see 

Recommended characters in 

user names and passwords

.

 

Related links

Logging in to iDRAC as local user, Active Directory user, or LDAP user
Logging in to iDRAC using a smart card
Logging in to iDRAC using Single Sign-On
Changing default login password

Logging in to iDRAC as local user, Active Directory user, or LDAP user

Before you log in to iDRAC using the web interface, make sure that you have configured a supported web browser and the user 
account is created with the required privileges.

NOTE: The user name is 

not

 case-sensitive for an Active Directory user. The password is case-sensitive for all users.

NOTE: In addition to Active Directory, openLDAP, openDS, Novell eDir, and Fedora-based directory services are 
supported.

NOTE: LDAP authentication with OpenDS is supported. The DH key must be larger than 768 bits.

To log in to iDRAC as local user, Active Directory user, or LDAP user:

1.

Open a supported web browser.

2.

In the 

Address

 field, type 

https://[iDRAC-IP-address]

 and press <Enter>.

NOTE: If the default HTTPS port number (port 443) was changed, enter: 

https://[iDRAC-IP-address]:

[port-number]

 where, 

[iDRAC-IP-address]

 is the iDRAC IPv4 or IPv6 address and 

[port-number]

 is the 

HTTPS port number.

The 

Login

 page is displayed.

3.

For a local user:
•

In the 

Username

 and 

Password

 fields, enter your iDRAC user name and password.

•

From the 

Domain

 drop-down menu, select 

This iDRAC

.

4.

For an Active Directory user, in the 

Username

 and 

Password

 fields, enter the Active Directory user name and password. If you 

have specified the domain name as a part of the username, select 

This iDRAC

 from the drop-down menu. The format of the 

user name can be: <domain>\<username>, <domain>/<username>, or <user>@<domain>.
For example, dell.com\john_doe, or [email protected].

32

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments