manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 222 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 222

– Click 

Create Job For Successful Operations

 to create the job for the existing pending operations. If the job is created 

successfully, a message indicating that the job ID is created for the selected device is displayed. Click 

Job Queue

 to view the 

progress of the job in the 

Job Queue

 page. If the job is not created, a message indicating that the job creation was not 

successful is displayed. Also, the message ID and the recommended response action are displayed.

– Click 

Cancel

 to not create the job and remain on the page to perform more storage configuration operations. 

Case 3: selected add to pending operations and there are no existing pending operations

If you have selected 

Add to Pending Operations

 and then clicked 

Apply

, first the pending operation is created for the selected 

storage configuration operation.

•

If the pending operation is created successfully and if there are no existing pending operations, then an information message is 

displayed:

– Click 

OK

 to remain on the page to perform more storage configuration operations.

– Click 

Pending Operations

 to view the pending operations for the device. Until the job is created on the selected controller, 

these pending operations are not applied.

•

If the pending operation is not created successfully and if there are no existing pending operations, then an error message is 

displayed.

Case 4: selected add to pending operations and there are prior existing pending operations

If you have selected 

Add to Pending Operations

 and then clicked 

Apply

, first the pending operation is created for the selected 

storage configuration operation.

•

If the pending operation is created successfully and if there are existing pending operations, then an information message is 

displayed:

– Click 

OK

 to remain on the page to perform more storage configuration operations.

– Click 

Pending Operations

 to view the pending operations for the device.

•

If the pending operation is not created successfully and if there are existing pending operations, then an error message is 

displayed.

– Click 

OK

 to remain on the page to perform more storage configuration operations.

– Click 

Pending Operations

 to view the pending operations for the device.

NOTE: 

•

At any time, if you do not see the option to create a job on the storage configuration pages, go to 

Storage Overview

 → 

Pending Operations

 page to view the existing pending operations and to create the job on the required controller.

•

Only cases 1 and 2 are applicable for PCIe SSD. You cannot view the pending operations for PCIe SSDs and hence 

Add to 

Pending Operations

 option is not available. Use racadm command to clear the pending operations for PCIe SSDs.

Blinking or unblinking component LEDs

You can locate a physical disk, virtual disk drive and PCIe SSDs within an enclosure by blinking one of the Light Emitting Diodes 
(LEDs) on the disk.

You must have Login privilege to blink or unblink an LED.

The controller must be real-time configuration capable. The real-time support of this feature is available only in PERC 9.1 firmware 
and later.

NOTE: Blink or unblink is not supported for servers without backplane.

222

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments