manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 83 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 83

Configuring services using web interface

To configure the services using iDRAC Web interface:

1.

In the iDRAC Web interface, go to 

Overview

 → 

iDRAC Settings

 → 

Network

 → 

Services

.

The 

Services

 page is displayed.

2.

Specify the required information and click 

Apply

.

For information about the various settings, see the

 iDRAC Online Help

.

NOTE: Do not select the Prevent this page from creating additional dialogs check-box. Selecting this option 
prevents you from configuring services.

Configuring services using RACADM

To enable and configure services using RACADM, use the set command with the objects in the following object groups:

•

iDRAC.LocalSecurity

•

iDRAC.LocalSecurity

•

iDRAC.SSH

•

iDRAC.Webserver

•

iDRAC.Telnet

•

iDRAC.Racadm

•

iDRAC.SNMP

For more information about these objects, see 

iDRAC RACADM Command Line Interface Reference Guide

 available at 

dell.com/

idracmanuals

.

Enabling or disabling HTTPs redirection

If you do not want automatic redirection from HTTP to HTTPs due to certificate warning issue with default iDRAC certificate or as a 
temporary setting for debugging purpose, you can configure iDRAC such that redirection from http port (default is 80) to https port 
(default is 443) is disabled. By default, it is enabled. You have to log out and log in to iDRAC for this setting to take effect. When you 
disable this feature, a warning message is displayed.
You must have Configure iDRAC privilege to enable or disable HTTPs redirection.

An event is recorded in the Lifecycle Controller log file when this feature is enabled or disabled.

To disable the HTTP to HTTPs redirection:

racadm set iDRAC.Webserver.HttpsRedirection Disabled

To enable HTTP to HTTPs redirection:

racadm set iDRAC.Webserver.HttpsRedirection Enabled

To view the status of the HTTP to HTTPs redirection:

racadm get iDRAC.Webserver.HttpsRedirection

Configuring TLS

By default, iDRAC is configured to use TLS 1.1 and higher. You can configure iDRAC to use any of the following:

•

TLS 1.0 and higher

•

TLS 1.1 and higher

•

TLS 1.2 only

83

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments