manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 73 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 73

Rollback firmware using Lifecycle Controller

For information, see 

Lifecycle Controller User’s Guide 

available at 

dell.com/idracmanuals

.

Rollback firmware using Lifecycle Controller-Remote Services

For information, see 

Lifecycle Controller Remote Services Quick Start Guide

 available at 

dell.com/idracmanuals

.

Recovering iDRAC

iDRAC supports two operating system images to make sure a bootable iDRAC. In the event of an unforeseen catastrophic error and 
you lose both boot paths:

•

iDRAC bootloader detects that there is no bootable image.

•

System Health and Identify LED is flashed at ~1/2 second rate. (LED is located on the back of a rack and tower servers and on 

the front of a blade server.)

•

Bootloader is now polling the SD card slot.

•

Format an SD card with FAT using a Windows operating system, or EXT3 using a Linux operating system.

•

Copy 

firmimg.d7

 to the SD card.

•

Insert the SD card into the server.

•

Bootloader detects the SD card, turns the flashing LED to solid amber, reads the firmimg.d7, reprograms iDRAC, and then 

reboots iDRAC.

Using TFTP server

You can use Trivial File Transfer Protocol (TFTP) server to upgrade or downgrade iDRAC firmware or install certificates. It is used in 
SM-CLP and RACADM command-line interfaces to transfer files to and from iDRAC. The TFTP server must be accessible using an 
iDRAC IP address or DNS name.

NOTE: If you use iDRAC web interface to transfer certificates and update firmware, TFTP server is not required.

You can use the 

netstat -a

 command on Windows or Linux operating systems to see if a TFTP server is running. The default 

port for TFTP is 69. If TFTP server is not running, do one of the following:

•

Find another computer on the network running a TFTP service.

•

Install a TFTP server on the operating system.

Backing up server profile

You can back up the system configuration, including the installed firmware images on various components such as BIOS, RAID, NIC, 
iDRAC, Lifecycle Controller, and Network Daughter Cards (NDCs) and the configuration settings of those components. The backup 
operation also includes the hard disk configuration data, motherboard, and replaced parts. The backup creates a single file that you 
can save to a vFlash SD card or network share (CIFS or NFS).

You can also enable and schedule periodic backups of the firmware and server configuration based on a certain day, week, or 
month.

Backup feature is licensed and is available with the iDRAC Enterprise license.

NOTE: In 13th generation servers, this feature is automatically enabled.

Before performing a backup operation, make sure that:

•

Collect System Inventory On Reboot (CSIOR) option is enabled. If you initiate a back operation while CSIOR is disabled, the 

following message is displayed:

System Inventory with iDRAC may be stale,start CSIOR for updated inventory

73

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments