manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 71 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 71

You must have Server Control privilege to delete jobs.

Viewing and managing staged updates using RACADM

To view the staged updates using RACADM, use jobqueue sub-command. For more information, see the 

iDRAC RACADM 

Command Line Interface Reference Guide

 available at 

dell.com/idracmanuals

.

Rolling back device firmware

You can roll back the firmware for iDRAC or any device that Lifecycle Controller supports, even if the upgrade was previously 
performed using another interface. For example, if the firmware was upgraded using the Lifecycle Controller GUI, you can roll back 
the firmware using the iDRAC web interface. You can perform firmware rollback for multiple devices with one system reboot.

On Dell’s 13

th

 generation PowerEdge servers that have a single iDRAC and Lifecycle Controller firmware, rolling back the iDRAC 

firmware also rolls back the Lifecycle Controller firmware. However, on a 12

th

 generation PowerEdge server with firmware version 

2.

xx

.

xx

.

xx

, rolling back iDRAC to a previous version such as 1.

xx

.

xx

 does not roll back the Lifecycle Controller firmware version. It is 

recommended that you roll back Lifecycle Controller to a previous version after rolling back iDRAC.

NOTE: On a 12th generation of PowerEdge server with firmware version 2.10.10.10, you cannot roll back Lifecycle 
Controller to 1.

xx

.

xx

 without rolling back iDRAC. Roll back iDRAC first to 1.

xx

.

xx

 version and only then can you roll back 

Lifecycle Controller.

It is recommended to keep the firmware updated to ensure you have the latest features and security updates. You may need to 
rollback an update or install an earlier version if you encounter any issues after an update. To install an earlier version, use Lifecycle 
Controller to check for updates and select the version you want to install.

You can perform firmware rollback for the following components:

•

iDRAC with Lifecycle Controller

•

BIOS

•

Network Interface Card (NIC)

•

Power Supply Unit (PSU)

•

RAID Controller

•

Backplane

NOTE: You cannot perform firmware rollback for Diagnostics, Driver Packs, and CPLD.

Before rolling back the firmware, make sure that:

•

You have Configure privilege to roll back iDRAC firmware.

•

You have Server Control privilege and have enabled Lifecycle Controller to roll back firmware for any other device other than the 

iDRAC.

•

Change the NIC mode to 

Dedicated

 if the mode is set as 

Shared LOM

.

You can roll back the firmware to the previously installed version using any of the following methods:

•

iDRAC web interface

•

CMC web interface

•

RACADM CLI — iDRAC and CMC

•

Lifecycle Controller GUI

•

Lifecycle Controller-Remote Services

71

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments