manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 51 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 51

Setting up managed system

If you need to run local RACADM or enable Last Crash Screen capture, install the following from the 

Dell Systems Management 

Tools and Documentation

 DVD:

•

Local RACADM

•

Server Administrator

For more information about Server Administrator, see 

Dell OpenManage

 Server Administrator User’s Guide available at 

dell.com/

support/manuals

.

Related links

Modifying local administrator account settings

Modifying local administrator account settings

After setting the iDRAC IP address, you can modify the local administrator account settings (that is, user 2) using the iDRAC 
Settings utility. To do this:

1.

In the iDRAC Settings utility, go to 

User Configuration

.

The

 iDRAC Settings User Configuration

 page is displayed.

2.

Specify the details for 

User Name

, 

LAN User Privilege

, 

Serial Port User Privilege

, and 

Change Password

.

For information about the options, see the 

iDRAC Settings Utility Online Help

.

3.

Click 

Back

, click 

Finish

, and then click 

Yes

.

The local administrator account settings are configured.

Setting up managed system location

You can specify the location details of the managed system in the data center using the iDRAC Web interface or iDRAC Settings 
utility.

Setting up managed system location using web interface

To specify the system location details:

1.

In the iDRAC web interface, go to 

Overview

 → 

Server

 → 

Properties

 → 

Details

.

The 

System Details

 page is displayed.

2.

Under 

System Location

, enter the location details of the managed system in the data center.

For information about the options, see the 

iDRAC Online Help

.

3.

Click 

Apply

. The system location details are saved in iDRAC.

Setting up managed system location using RACADM

To specify the system location details, use the 

System.Location

 group objects.

For more information, see the 

iDRAC RACADM Command Line Interface Reference Guide

 available at 

dell.com/idracmanuals

.

Setting up managed system location using iDRAC settings utility

To specify the system location details:

1.

In the iDRAC Settings utility, go to 

System Location

.

The 

iDRAC Settings System Location

 page is displayed.

2.

Enter the location details of the managed system in the data center. For information about the options, see the 

iDRAC Settings 

Utility Online Help

.

3.

Click 

Back

, click 

Finish

, and then click 

Yes

.

51

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments