manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 91 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 91

•

RHEL 5.9 (32-bit and 64-bit)

•

RHEL 6.4

•

RHEL 6.7

•

vSphere v5.0 U2 ESXi

•

vSphere v5.1 U3

•

vSphere v5.1 U1 ESXi

•

vSphere v5.5 ESXi

•

vSphere v5.5 U3

•

vSphere 6.0

•

vSphere 6.0 U1

•

CentOS 6.5

•

CentOS 7.0

•

Ubuntu 14.04.1 LTS

•

Ubuntu 12.04.04 LTS

•

Debian 7.6 (Wheezy)

•

Debian 8.0

On servers with Windows 2008 SP2 64-bit operating system, the iDRAC Virtual CD USB Device is not discovered automatically (or 
enabled). You must enable this manually. For more information, see steps recommended by Microsoft to manually update the 
Remote Network Driver Interface Specification (RNDIS) driver for this device.

For Linux operating systems, configure the USB NIC as DHCP on the host operating system before enabling USB NIC.

If the operating system on the host is SUSE Linux Enterprise Server 11, CentOS 6.5, CentOS 7.0, Ubuntu 14.04.1 LTS, or Ubuntu 
12.04.4 LTS then after enabling the USB NIC in iDRAC, you must manually enable DHCP client on the host operating system. For 
information to enable DHCP, see the documents for SUSE Linux Enterprise Server, CentOS, and Ubuntu operating systems.

For vSphere, you must install the VIB file before enabling USB NIC.

For the following operating systems, if you install the Avahi and nss-mdns packages, then you can use 

https://idrac.local

 to launch 

the iDRAC from the host operating system. If these packages are not installed, use 

https://169.254.0.1

 to launch the iDRAC.

Operating 

System

Firewall 

Status

Avahi Package

nss-mdns Package

RHEL 5.9 32–
bit

Disable

Install as a separate package 
(avahi-0.6.16-10.el5_6.i386.rpm)

Install as a separate package (nss-
mdns-0.10-4.el5.i386.rpm)

RHEL 6.4 64–
bit

Disable

Install as a separate package 
(avahi-0.6.25-12.el6.x86_64.rpm)

Install as a separate package (nss-
mdns-0.10-8.el6.x86_64.rpm)

SLES 11 SP3 
64–bit

Disable

Avahi package is the part of operating system DVD nss-mdns is installed while installing Avahi

On the host system, while installing RHEL 5.9 operating system, the USB NIC pass-through mode is in disabled state. If it is enabled 
after the installation is complete, the network interface corresponding to the USB NIC device is not active automatically. You can do 
any of the following to make the USB NIC device active:

•

Configure the USB NIC interface using Network Manager tool. Navigate to 

System

 → 

Administrator

 → 

Network

 → 

Devices 

→ 

New

 → 

Ethernet Connection

 and select 

Dell computer corp.iDRAC Virtual NIC USB Device

. Click the Activate icon to 

activate the device. For more information, see the RHEL 5.9 documentation.

•

Create corresponding interface’s config file as ifcfg-ethX in /etc/sysconfig/network-script/ directory. Add the basic entries 

DEVICE, BOOTPROTO, HWADDR, ONBOOT. Add TYPE in the ifcfg-ethX file and restart the network services using the 

command 

service network restart

.

•

Reboot the system.

91

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments