manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 297 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 297

This occurs if the 

Mouse Mode

 is set to

 USC/Diags

. Press 

Alt + M

 hot key to use the mouse on the local system. Press 

Alt + M 

again to use the mouse on the Virtual Console.

When iDRAC web interface is launched from the CMC web interface soon after Virtual Console is launched, why does GUI 
session time-out?

When launching the Virtual Console to iDRAC from the CMC web interface a popup is opened to launch the Virtual Console. The 
popup closes shortly after the Virtual Console opens.

When launching both the GUI and Virtual Console to the same iDRAC system on a management station, a session time-out for the 
iDRAC GUI occurs if the GUI is launched before the popup closes. If the iDRAC GUI is launched from the CMC web interface after 
the popup with the Virtual Console closed, this issue does not appear.

Why does Linux SysRq key not work with Internet Explorer?

The Linux SysRq key behavior is different when using Virtual Console from Internet Explorer. To send the SysRq key, press the 

Print Screen

 key and release while holding the

 Ctrl

 and 

Alt

 keys. To send the SysRq key to a remote Linux server though iDRAC, 

while using Internet Explorer:
1.

Activate the magic key function on the remote Linux server. You can use the following command to activate it on the Linux 

terminal:

echo 1 > /proc/sys/kernel/sysrq

2.

Activate the keyboard pass-through mode of Active X Viewer. 

3.

Press 

Ctrl+Alt+Print Screen

. 

4.

Release only 

Print Screen

. 

5.

Press 

Print Ctrl+Alt

.

NOTE: The SysRq feature is currently not supported with Internet Explorer and Java.

Why is the "Link Interrupted" message displayed at the bottom of the Virtual Console?

When using the shared network port during a server reboot, iDRAC is disconnected while BIOS is resetting the network card. This 
duration is longer on 10 Gb cards, and is also exceptionally long if the connected network switch has Spanning Tree Protocol (STP) 
enabled. In this case, it is recommended to enable "portfast" for the switch port connected to the server. In most cases, the Virtual 
Console restores itself.

Virtual media

Why does the Virtual Media client connection sometimes drop?

When a network time-out occurs, iDRAC firmware drops the connection, disconnecting the link between the server and the virtual 
drive.

If you change the CD in the client system, the new CD may have an autostart feature. In this case, the firmware can time out and 
the connection is lost if the client system takes too long to read the CD. If a connection is lost, reconnect from the GUI and continue 
the previous operation.

If the Virtual Media configuration settings are changed in the iDRAC web interface or through local RACADM commands, any 
connected media is disconnected when the configuration change is applied.

To reconnect to the Virtual Drive, use the Virtual Media 

Client View

 window.

Why does a Windows operating system installation through Virtual Media take an extended amount of time?

If you are installing the Windows operating system using the 

Dell Systems Management Tools and Documentation DVD

 and the 

network connection is slow, the installation procedure may require an extended amount of time to access iDRAC web interface due 
to network latency. The installation window does not indicate the installation progress.

297

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments