manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 140 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 140

OID

1.2.840.113556.1.8000.1280.1.1.1.3

dellIsCardConfigAdmin

dellIsUserConfigAdmin

dellIsLogClearAdmin

dellIsServerResetUser

dellIsConsoleRedirectUser

dellIsVirtualMediaUser

dellIsTestAlertUser

dellIsDebugCommandAdmin

Table 26. dellPrivileges class

OID

1.2.840.113556.1.8000.1280.1.1.1.4

Description

Used as a container Class for the Dell Privileges (Authorization 

Rights).

Class Type

Structural Class

SuperClasses

User

Attributes

dellRAC4Privileges

Table 27. dellProduct class

OID

1.2.840.113556.1.8000.1280.1.1.1.5

Description

The main class from which all Dell products are derived.

Class Type

Structural Class

SuperClasses

Computer

Attributes

dellAssociationMembers

Table 28. List of attributes added to the active directory schema

Attribute Name/Description

Assigned OID/Syntax Object Identifier

Single Valued

dellPrivilegeMember

List of dellPrivilege Objects that belong 

to this Attribute.

1.2.840.113556.1.8000.1280.1.1.2.1

Distinguished Name (LDAPTYPE_DN 

1.3.6.1.4.1.1466.115.121.1.12)

FALSE

dellProductMembers

List of dellRacDevice and 

DelliDRACDevice Objects that belong 

to this role. This attribute is the 

forward link to the 

dellAssociationMembers backward link.

Link ID: 12070

1.2.840.113556.1.8000.1280.1.1.2.2

Distinguished Name (LDAPTYPE_DN 

1.3.6.1.4.1.1466.115.121.1.12)

FALSE

140

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments