manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 55 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 55

Object

Description

Usage

Example

High (66% PWM) over the 

baseline fan speed

racadm set 

system.thermalsetting

s FanSpeedOffset 1

FanSpeedLowOffsetVal

•

Getting this variable reads 

the fan speed offset value 

in %PWM for Low Fan 

Speed Offset setting.

•

This value depends on the 

system.

•

Use 

FanSpeedOffset 

object to set this value 

using index value 0.

Values from 0-100

racadm get 

system.thermalsetting

s 

FanSpeedLowOffsetVal

This returns a value such as 

“23”. This means that when 

you use the following 

command, it applies a fan 

speed offset of Low (23% 

PWM) over baseline fan speed

racadm set 

system.thermalsetting

s FanSpeedOffset 0

FanSpeedMaxOffsetVal

•

Getting this variable reads 

the fan speed offset value 

in %PWM for Max Fan 

Speed Offset setting.

•

This value depends on the 

system.

•

Use 

FanSpeedOffset

 to 

set this value using index 

value 3

Values from 0-100

racadm get 

system.thermalsetting

s 

FanSpeedMaxOffsetVal

This returns a value such as 

“100”. This means that when 

you use the following 

command, it applies a fan 

speed offset of Max (meaning 

full speed, 100% PWM). 

Usually, this offset results in 

fan speed increasing to full 

speed.

racadm set 

system.thermalsetting

s FanSpeedOffset 3

FanSpeedMediumOffsetV
al

•

Getting this variable reads 

the fan speed offset value 

in %PWM for Medium Fan 

Speed Offset setting.

•

This value depends on the 

system.

•

Use 

FanSpeedOffset 

object to set this value 

using index value 2

Values from 0-100

racadm get 

system.thermalsetting

s 

FanSpeedMediumOffsetV

al

This returns a value such as 

“47”. This means that when 

you use the following 

command, it applies a fan 

speed offset of Medium (47% 

PWM) over baseline fan speed

racadm set 

system.thermalsetting

s FanSpeedOffset 2

FanSpeedOffset

•

Using this object with get 

command displays the 

existing Fan Speed Offset 

value.

•

Using this object with set 

command allows setting 

the required fan speed 

offset value.

Values are:
•

0 — Low Fan Speed

•

1 — High Fan Speed

•

2 — Medium Fan Speed

•

3 — Max Fan Speed

•

255 — None

To view the existing setting:

racadm get 

system.thermalsetting

s.FanSpeedOffset

55

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments