manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 159 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 159

Configuring email alert settings using RACADM

1.

To enable email alert:

racadm set iDRAC.EmailAlert.Enable.[index] [n]

Parameter

Description

index

Email destination index. Allowed values are 1 through 4.

n

=0

n

=1

Disables email alerts.

Enables email alerts.

2.

To configure email settings:

racadm set iDRAC.EmailAlert.Address.[index] [email-address]

Parameter

Description

index

Email destination index. Allowed values are 1 through 4.

email-address

Destination email address that receives the platform event alerts.

3.

To configure a custom message:

racadm set iDRAC.EmailAlert.CustomMsg.[index] [custom-message]

Parameter

Description

index

Email destination index. Allowed values are 1 through 4.

custom-message

Custom message

4.

To test the configured email alert, if required:

racadm testemail -i [index]

Parameter

Description

index

Email destination index to be tested. Allowed values are 1 through 4.

For more information, see the 

iDRAC RACADM Command Line Interface Reference Guide

 available at 

dell.com/idracmanuals

.

Configuring SMTP email server address settings

You must configure the SMTP server address for email alerts to be sent to specified destinations.

Configuring SMTP email server address settings using iDRAC web interface

To configure the SMTP server address:

1.

In iDRAC Web interface, go to 

Overview

 → 

Server

 → 

Alerts

 → 

SNMP and E-mail Settings

.

2.

Enter the valid IP address or fully qualified domain name (FQDN) of the SMTP server to be used in the configuration.

3.

Select the 

Enable Authentication

 option and then provide the user name and password (of a user who has access to SMTP 

server).

4.

Enter the SMTP port number.
For more information about the fields, see the 

iDRAC Online Help

.

5.

Click 

Apply

.

The SMTP settings are configured.

Configuring SMTP email server address settings using RACADM 

To configure the SMTP email server:

racadm set iDRAC.RemoteHosts.SMTPServerIPAddress <SMTP E-mail Server IP Address>

159

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments