Home
/
Dell
/
iDRAC 7
/
User Manual

Dell iDRAC 7, User Manual, Page: 226 / 309

Share

Page: 226 / 309

Dell iDRAC 7 User Manual Download Page 226

While launching the Virtual Console using Java plug-in, occasionally you may see a Java compilation error. To resolve this, go to

Java

control panel

→

General

→

Network Settings

and select

Direct Connection

.

If the Virtual Console is configured to use ActiveX plug-in, it may not launch the first time. This is because of the slow network
connection and the temporary credentials (that Virtual Console uses to connect) timeout is two minutes. The ActiveX client plug-in
download time may exceed this time. After the plug-in is successfully downloaded, you can launch the Virtual Console normally.

To launch the Virtual Console by using HTML5 plug-in, you must disable the pop-up blocker.

Related links

Launching virtual console using a URL
Configuring Internet Explorer to use HTML5-based plug-in
Configuring the web browser to use Java plug-in
Configuring IE to use ActiveX plug-in
Launching virtual console using web interface
Disabling warning messages while launching virtual console or virtual media using Java or ActiveX plug-in
Synchronizing mouse pointers

Launching virtual console using web interface

You can launch the virtual console in the following ways:

•

Go to

Overview

→

Server

→

Virtual Console

. The

Virtual Console

page is displayed. Click

Launch Virtual Console

. The

Virtual

Console Viewer

is launched.

•

Go to

Overview

→

Server

→

Properties

. The

System Summary

page is displayed. Under

Virtual Console Preview

section,

click

Launch

. The

Virtual Console Viewer

is launched.

The

Virtual Console Viewer

displays the remote system’s desktop. Using this viewer, you can control the remote system’s mouse

and keyboard functions from your management station.

Multiple message boxes may appear after you launch the application. To prevent unauthorized access to the application, navigate
through these message boxes within three minutes. Otherwise, you are prompted to relaunch the application.

If one or more Security Alert windows appear while launching the viewer, click Yes to continue.

Two mouse pointers may appear in the viewer window: one for the managed server and another for your management station. To
synchronize the cursors, see

Synchronizing mouse pointers

.

Launching virtual console using a URL

To launch the Virtual Console using the URL:

1.

Open a supported Web browser and in the address box, type the following URL in lower case:

https://iDRAC_ip/console

2.

Based on the login configuration, the corresponding

Login

page is displayed:

•

If Single Sign On is disabled and Local, Active Directory, LDAP, or Smart Card login is enabled, the corresponding

Login

page is displayed.

•

If Single-Sign On is enabled, the

Virtual Console Viewer

is launched and the

Virtual Console

page is displayed in the

background.

NOTE: Internet Explorer supports Local, Active Directory, LDAP, Smart Card (SC) and Single Sign-On (SSO)
logins. Firefox supports Local, AD, and SSO logins on Windows-based operating system and Local, Active Directory,
and LDAP logins on Linux-based operating systems.

NOTE: If you do not have Access Virtual Console privilege but have Access Virtual Media privilege, then using this
URL launches the Virtual Media instead of the Virtual Console.

226

«
...
224
225
226
227
228
...
»

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments