manualshive.com logo in svg

Dell iDRAC 7, User Manual, Page: 303 / 309

Share
Download
Dell iDRAC 7 User Manual Download Page 303

•

iDRAC is reset.

•

A new SSL server certificate is uploaded.

Why is an error message displayed if you try to delete a partition after creating it using local RACADM?

This occurs because the create partition operation is in-progress. However, the partition is deleted after sometime and a message 
that the partition is deleted is displayed. If not, wait until the create partition operation is completed and then delete the partition.

Miscellaneous

How to find an iDRAC IP address for a blade server?

•

Using CMC web interface

:

Go to 

Chassis

 → 

Servers

 → 

Setup

 → 

Deploy

. In the table that is displayed, view the IP address for the server.

•

Using the Virtual Console

: Reboot the server to view the iDRAC IP address during POST. Select the "Dell CMC" console in the 

OSCAR to log in to CMC through a local serial connection. CMC RACADM commands can be sent from this connection.
For more information on CMC RACADM commands, see the 

CMC RACADM Command Line Interface Reference Guide 

available at 

dell.com/esmmanuals

.

For more information on iDRAC RACADM commands, see the 

iDRAC RACADM Command Line Interface Reference Guide 

available at 

dell.com/idracmanuals

.

•

Using local RACADM

Use the command: 

racadm getsysinfo

 For example:

$ racadm getniccfg -m server-1

DHCP Enabled = 1

IP Address   = 192.168.0.1

Subnet Mask  = 255.255.255.0

Gateway      = 192.168.0.1

•

Using LCD

:

On the main menu, highlight the server, press the check button, select the required server, and press the check button.

How to find the CMC IP address related to the blade server?

•

From iDRAC web interface

:

Go to 

Overview

 → 

iDRAC Settings

 → 

CMC

. The 

CMC Summary

 page displays the CMC IP address.

•

From the Virtual Console

:

Select the "Dell CMC" console in the OSCAR to log in to CMC through a local serial connection. CMC RACADM commands can 
be issued from this connection.

$ racadm getniccfg -m chassis

NIC Enabled         = 1

DHCP Enabled        = 1

Static IP Address   = 192.168.0.120

Static Subnet Mask  = 255.255.255.0

Static Gateway      = 192.168.0.1

Current IP Address  = 10.35.155.151

Current Subnet Mask = 255.255.255.0

Current Gateway     = 10.35.155.1

Speed               = Autonegotiate

Duplex              = Autonegotiate

NOTE: You can also perform this using remote RACADM.

For more information on CMC RACADM commands, see the 

CMC RACADM Command Line Interface Reference Guide 

available at 

dell.com/esmmanuals

.

For more information on iDRAC RACADM commands, see the 

iDRAC RACADM Command Line Interface Reference Guide 

available at 

dell.com/idracmanuals

.

303

Summary of Contents for iDRAC 7






















































































































































































































































































































Reviews:

No comments