Dell 5330dn - Workgroup Laser Printer B/W User Manual Download Page 163

Page: 163 / 180

4. Open and close the top cover. The printer will resume printing.

Duplex jam 1

1. Open the rear door.

2. Gently pull the jammed paper straight up.

3. Close the rear door.

4. Open and close the top cover. The printer will resume printing.

Tips for Avoiding Paper Jams

By selecting the correct paper types, most paper jams can be avoided. When a paper jam occurs, follow the steps

outlined in

"Clearing Jams in the Paper Tray"

Follow the procedures in

"Loading Print Media in the Paper Tray"

. Ensure that the adjustable guides are correctly

positioned.

Do not overload the paper tray. Ensure that the paper is below the paper capacity mark on the inside wall of the

paper tray.

Do not remove the paper from the tray while your printer is printing.

Summary of Contents for 5330dn - Workgroup Laser Printer B/W





















































































































































































Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands

Dell 5330dn - Workgroup Laser Printer B/W, User Manual

Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands