your printer is 50 PPM for Letter-
sized paper.
Half the page is
blank.
The page orientation setting
may be incorrect.
Change the page orientation in
your application. See
"Layout
Tab"
.
The paper size and the paper
size settings do not match.
Ensure that the paper size in the
printer driver settings matches
the paper in the tray.
The printer
prints, but the
text is wrong,
garbled, or
incomplete.
The printer cable is loose or
defective.
Disconnect the printer cable and
reconnect. Try a print job that
you have already printed
successfully.
If possible,
attach
the cable and the printer to
another computer and try a print
job that you know works. Finally,
try a new printer cable.
The wrong printer driver was
selected.
Check the application's printer
selection menu to ensure that
your printer is selected.
The software application is
malfunctioning.
Try printing a job from another
application.
The operating system is
malfunctioning.
Exit Windows and reboot the
computer. Power the printer off
and then back on again.
Pages print, but
are blank.
The toner cartridge is
defective or out of toner.
Thoroughly shake the toner. See
"Redistributing Toner"
.
If necessary,
replace the toner
cartridge.
The file may have blank
pages.
Check the file to ensure that it
does not contain blank pages.
Some parts, such as the
controller or the board, may
be defective.
Contact a service representative.
The illustrations
print incorrectly
in Adobe
Illustrator.
The setting in the software
application is wrong.
Print the document by selecting
Download as Bit Image
in the
Advanced Options
window of
the Graphic properties.
Printing Quality Problems
The inside of the printer may be dirty or improper paper loading may reduce the print quality. See the table below to clear
the problem.
