Dell 5330dn - Workgroup Laser Printer B/W User Manual Download Page 166

Page: 166 / 180

Paper Jam 2...

Paper has jammed in the paper

exit area.

Clear the jam. See

"In the

paper exit area"

"Around the

toner cartridge"

Duplex jam
0...

Paper has jammed during

duplex printing.

Clear the jam. See

"Duplex

jam 0"

Duplex jam
1...

Paper has jammed during

duplex printing.

Clear the jam. See

"Duplex

jam 1"

Standard Bin
Full/
Standard Bin
is 90% Full

The output tray is full.

The output tray can hold up to

250 sheets of plain paper.

Once the paper is removed

from the output tray, the

printer resumes printing.

Optional Bin1
Full

The output tray of output

expander is full.

The output expander can hold

up to 600 sheets of plain

paper. Once the paper is

removed from the output

expander, the printer resumes

printing.

Open Heat
Open Heat
Error
Power Cycle

There is a problem in the fuser

unit.

Unplug the power cord and

plug it back in.

If the problem

persists,

please call for service.

Low Heat/
Low heat Error

Power Cycle

There is a problem in the fuser

unit.

Unplug the power cord and

plug it back in.

If the problem

persists,

please call for service.

Over Heat
Overheat Error

Power Cycle

There is a problem in the fuser

unit.

Unplug the power cord and

plug it back in.

If the problem

persists,

please call for service.

LSU Motor
Error/
LSU Motor
Error/
Power Cycle

A problem has occurred in the

LSU(Laser Scanning Unit).

Unplug the power cord and

plug it back in.

If the problem

persists,

please call for service.

Hsync Error/
LSU Hsync
Error
Power Cycle

A problem has occurred in the

LSU(Laser Scanning Unit).

Unplug the power cord and

plug it back in.

If the problem

persists,

please call for service.

Fuser  Error
Fuser  Fan
Locked
Power  Cycle

There is a problem in the

cooling fan of the printer.

Open and then close the

rear

door

SMPS Error
SMPS Fan
Locked
Power Cycle

There is a problem in the SMPS

fan of the printer.

Unplug the power cord and

plug it back in.

If the problem

persists,

please call for service.

Fuser  Error/
Fuser  Not
Installed
Check  Rear
Door

The fuser unit is not installed

or not detected.

Install the fuser unit or open

and then close the

rear door

Summary of Contents for 5330dn - Workgroup Laser Printer B/W





















































































































































































Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands

Dell 5330dn - Workgroup Laser Printer B/W, User Manual

Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands