Dell 5330dn - Workgroup Laser Printer B/W User Manual Download Page 154

Page: 154 / 180

forms use inks that are compatible with this fusing temperature (180° C or 356° F for 0.1 second).

Paper Specifications

Category

Specifications

Acid Content

5.5 pH or lower

Caliper

0.094-0.18 mm (3.0-7.0 mils)

Curl in Ream

Flat within 0.02 in (5 mm)

Cut Edge

Conditions

Cut with sharp blades with no visible fray.

Fusing

Compatibility

Must not scorch, melt, offset, or release hazardous emissions

when heated up to 180° C (356° F) for 0.1 second.

Grain

Long Grain

Moisture

Content

4%-6% by weight

Smoothness

100-400 Sheffield

Paper Output Capacity

Output

Location

Capacity

Output tray

(Face Down)

250 sheets of 75 g/m

bond (20 lb) paper

Rear door

(Face Up)

100 sheets of 75 g/m

bond (20 lb) paper

Printer and Paper Storage Environment

Paper storage environmental conditions directly affect the feed operation.

Ideally, the printer and paper storage environment should be at or near room temperature not too dry or humid.

Remember that paper is hygroscopic: it absorbs and loses moisture rapidly.

Summary of Contents for 5330dn - Workgroup Laser Printer B/W





















































































































































































Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands

Dell 5330dn - Workgroup Laser Printer B/W, User Manual

Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands