Dell 5330dn - Workgroup Laser Printer B/W User Manual Download Page 78

Page: 78 / 180

Cleaning the inside of the printer manually

1. Power the printer off and unplug the power cord. Note the length of time it takes for the printer to cool down.

2. Open the

top cover

and pull the toner cartridge out. Set it on a clean flat surface.

CAUTION: To prevent damage, do not expose the toner cartridge to light for more than a few minutes.
CAUTION: Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this

area.

3. With a dry and lint-free cloth, wipe away any dust and spilled toner from the toner cartridge area and from the

toner cartridge cavity.

CAUTION: While cleaning the inside of the printer, be careful not to touch the transfer roller located underneath the toner

cartridge. Oil from your fingers can cause print quailty problems.

4. Gently swab the long strip of glass (Laser Scanning Unit) inside the top of the cartridge cavity and check for dirt or

dust.

Summary of Contents for 5330dn - Workgroup Laser Printer B/W





















































































































































































Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands

Dell 5330dn - Workgroup Laser Printer B/W, User Manual

Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands