Dell 5330dn - Workgroup Laser Printer B/W User Manual Download Page 159

Page: 159 / 180

CAUTION: To prevent damage, do not expose the

toner cartridge

to light for more than a few minutes.

CAUTION: Do not touch the green underside of the

toner cartridge

. Use the handle on the cartridge to avoid touching

this area.

2. Carefully lift up the feed guide.

3. Remove the jammed paper by gently pulling it straight out.

If you cannot see the paper in this area or if there is any resistance removing the paper,

stop pulling and go to the

paper exit area. For more information, see

"In the paper exit area"

Summary of Contents for 5330dn - Workgroup Laser Printer B/W





















































































































































































Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands

Dell 5330dn - Workgroup Laser Printer B/W, User Manual

Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands