Dell 5330dn - Workgroup Laser Printer B/W User Manual Download Page 47

Page: 47 / 180

6. Click

Using the Hard Disk

Installing the hard disk allows the data from your computer to be sent to the printer's hard disk print queue. This

decreases the computer's workload. You can also use various print features, such as storing a job in the hard disk,

proofing a job, and printing private documents.

Installing the Hard Disk

1. Turn the printer power off and unplug the power cord and printer cable from the printer.

2. Grasp the control board cover and remove it.

3. If electric lines are drooped, push them inside the printer.

Summary of Contents for 5330dn - Workgroup Laser Printer B/W





















































































































































































Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands

Dell 5330dn - Workgroup Laser Printer B/W, User Manual

Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands