Dell 5330dn - Workgroup Laser Printer B/W User Manual Download Page 158

Page: 158 / 180

3. Pull the tray 1 half-way out.

4. Pull the paper straight up and out.

5. Insert the trays back into the printer.

Printing automatically resumes.

Multi-purpose Feeder Jam

If the paper is not feeding properly,

pull the paper out of the printer.

2. Open and close the

top cover

to resume printing.

Around the Toner Cartridge

NOTES: The fuser area is hot. Take care when removing paper from the printer.

1. Open the

top cover

and pull the

toner cartridge

out. Set it on a clean flat surface.

Summary of Contents for 5330dn - Workgroup Laser Printer B/W





















































































































































































Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands

Dell 5330dn - Workgroup Laser Printer B/W, User Manual

Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands