Dell 5330dn - Workgroup Laser Printer B/W User Manual Download Page 165

Page: 165 / 180

Confirm Error

persists,

please call for service.

Close Toner
Door

The

top cover

is not securely

latched.

Close the cover until it locks

into place.

Close Rear
Door

The rear door is not securely

latched.

Close the door until it locks

into place.

Close Bin1
Door

The rear door of output

expander is not securely

latched.

Close the door until it locks

into place.

Close Fuser
Door

The fuser door is not securely

latched.

Open the

rear door

and close

the fuser door until it locks into

place.

Tray [x] Open
Tray [x] Open
Close Tray [x]

The displayed tray is open.

Close the tray until it locks into

place.

HCF Open
HCF Open
Close Door

HCF(High Capcity Feeder) is

open.

Close the HCF until it locks into

place.

Tray [x] Empty
Load
[Size][Type]

There is no paper in the tray.

Load paper in the tray. See

"Loading Print Media in the

Paper Tray"

HCF Empty
Load
[Size][Type]

There is no paper in the HCF.

Load paper in the HCF. See

"Using the High Capacity

Feeder"

MPF Empty
Load
[Size][Type]
Press
Select

There is no paper in the multi-

purpose feeder.

Load paper in the multi-

purpose feeder. See

"Using the

Multi-purpose Feeder"

Paper
Mismatch/
Tray [x]/MPF
Load
[Size][Type]
Continue

Cancel

The paper size specified in the

printer properties does not

match the paper being loading.

Load the correct paper in the

tray.

Paper Jam 0
Check Toner
Cover

Paper has jammed around the

toner cartridge area.

Clear the jam. See

"Around the

toner cartridge"

MP Tray
Check MPF Door

Paper has jammed in the

feeding area of the multi-

purpose feeder.

Clear the jam. See

"Multi-

purpose feeder Jam"

Paper Jam 0
Check Tray[x]

Paper has jammed in the

feeding area of the paper tray.

Clear the jam. See

"Paper Feed

Jam (tray 1)"

"Paper Feed

Jam (optional trays)"

Paper Jam 1
Open/Close
Door

Paper has jammed in the paper

exit area or around the toner

cartridge area.

Clear the jam. See

"In the

paper exit area"

"Around the

toner cartridge"

Summary of Contents for 5330dn - Workgroup Laser Printer B/W





















































































































































































Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands

Dell 5330dn - Workgroup Laser Printer B/W, User Manual

Search results

Summary of Contents for 5330dn - Workgroup Laser Printer B/W

Reviews:

Related manuals for 5330dn - Workgroup Laser Printer B/W

Brands by name

Popular brands