DRPD
Mode
You can receive a call using the Distinctive Ring Pattern Detection
(DRPD) feature which enables a user to use a single telephone line to
answer several different telephone numbers. In this menu, you can set the
printer to recognize the ring patterns to answer. For details about this
feature, see "Receiving Faxes Using the DRPD Mode" .
Select
Tray
You can set the tray that you want to use for a received fax printing
job.
Duplex
You can set the machine to print received faxes on both sides of
paper. The available options are
Off
,
Long Edge
, and
Short Edge
.
Testing Fax line connection
Press
Scroll
( or ) to highlight
Fax
and then press
Select
(
).
1.
Press
Scroll
(
or
) to highlight
Fax Line Test
and then press
Select
(
).
2.
Press
Scroll
(
or
) to select the option you want and then press
Select
(
).
Line Test
: Check the fax line connection.
Dial Tone Test
: Check the dial tone.
3.
The printer displays the test result.
If the fax line connection test has failed, check the telephone line cord connection or contact your
telephone service provider.
NOTE:
If test pass - you can start using the Fax functionality
If test fail - Need to direct them to the troubleshooting section for fax.
If you cannot hear the dial tone during the Dial Tone Test, contact your telephone service provider.
Printing Fax When Toner Low
When the toner cartridge is nearly empty, the machine shows the Toner Low message and stops printing.
You can set the machine to disregard this message when it appears and to continue printing, even though
print quality is not optimal.
Press
Scroll
( or ) to highlight
Fax
and then press
Select
(
).
1.
Press
Scroll
(
or
) to highlight
Allow Toner Low
and then press
Select
(
).
2.
Press
Scroll
(
or
) to change the setting to
On
(enable) or
Off
(disable).
If you select
Off
, the received fax cannot be printed until you install a new toner cartridge. However,
faxes can be received into memory as long as it allows.
3.
4.
Downloaded from ManualsPrinter.com Manuals
