7.
An IP address consists of 4 bytes.
Enter the numbers from the keypad and use
Scroll
( or ) to move between octets and then
press
Select
(
).
8.
Enter other parameters, such as the
Subnet Mask
or
Gateway
, and then press
Select
(
).
9.
After entering all parameters, press
Cancel
(
) to return to the Standby mode.
10.
Dynamic Addressing (BOOTP/DHCP)
To assign the TCP/IP address automatically using a DHCP or BOOTP server on your network.
Press
Scroll
( or ) to highlight
Setup
and then press
Select
(
).
1.
Press
Scroll
(
or
) to highlight
Network Setup
and then press
Select
(
).
2.
Press
Scroll
(
or
) to highlight
TCP/IP (IPv4)
and then press
Select
(
).
3.
Press
Scroll
(
or
) to highlight
Set IP Address
and then press
Select
(
).
4.
Press
Scroll
(
or
) to highlight
DHCP
and then press
Select
(
).
5.
To assign the address from the BOOTP server, press
Select
(
) when
BOOTP
displays.
Restoring the Network Configuration
You can return the network configuration to its default settings.
Press
Scroll
( or ) to highlight
Setup
and then press
Select
(
).
1.
Press
Scroll
(
or
) to highlight
Network Setup
and then press
Select
(
).
2.
Press
Scroll
(
or
) to highlight
Clear Settings
and then press
Select
(
).
3.
Press
Scroll
(
or
) to highlight
Yes
and then press
Select
(
) to restore the
network configuration.
4.
Power the printer off and back on or reset the network interface card.
5.
Downloaded from ManualsPrinter.com Manuals