Set Threshold Idle Time for Maintenance Alarm
• SP2111 to SP2114 are for future use and not used at the present time.
2111 TH:ALM:TM1
Time 1: 20 Hours
2112 TH:ALM:TM2
Time 2: 7 Days
2113 TH:ALM:TM3
Time 3: 1 Month
2114 TH:ALM:TM4
Time 4: 3 Months
For Future Use. Use this SP to set the threshold time for the printer to remain idle for maintenance
to execute before the start of a print job. (Default: 7 Days). These threshold values are related
to SP2115 to 2118.
[0 to 65535/0/1/sec.]
Set Maintenance Method
• SP2115 to SP2118 are for future use and not used at the present time.
2115 TH:ALM:TM1:MNT1
After Time 1 Alarm (SP2111): Venting
2116 TH:ALM:TM1:MNT2
After Time 2 Alarm (SP2112): Cleaning
2117 TH:ALM:TM1:MNT3
After Time 3 Alarm (SP2113): Cleaning *
1
2118 TH:ALM:TM1:MNT4
After Time 4 Alarm (SP2114): Cleaning *
2
Use this SP to select the type of maintenance that will be executed before the first print job begins
after the idle time threshold has elapsed.
*
1
Air venting/filling is done if Bit 1 of SW8-3 is ON.
*
2
Print head refreshing (flushing) is done if Bit 2 of SW8-3 is ON.
[0 to 65535/0/1/hours.]
Note: These SP codes are not available for this machine.
Set Threshold for Venting During Printing
• SP2200 to SP2202 are for future use and not used at the present time.
SP Mode Service Tables
245
5
Summary of Contents for J012
