Maintenance Unit Motor
Preparation:
• Remove platen or ADF
• Raise the scanner unit to full upright.
• Remove: (1) paper cassette, (2) paper output tray, (3) right cover
• The bottom edges of the maintenance unit are covered with ink. Spread a cloth or a sheet of paper
to set the unit on after it is removed. Avoid touching the bottom of the maintenance unit.
1. To unlock the carriage, use a plus (+) screwdriver to turn the screw [1] counter-clockwise until the tips
of the triangles [2] align.
2. Push the envelope selector [3] to the rear to raise the print head unit. Pushing the envelope selector
to the rear raises the print head unit. This prevents damaging the print head unit when the carriage is
moved manually.
• Always push the envelope selector to the rear before you move the carriage manually.
3. Replacement and Adjustment
112
3
Summary of Contents for J012
