Davin J012, Service Manual

Page: 161 / 365

SC Error Codes
Summary of Error Levels
Level Definition Typical Errors
A
The printer is damaged or disabled, and the printer
cannot operate. Even after removing the cause of the
problem, turning the printer off and on does not solve
the problem. SC Error Code.
This is a Service Call Error.
B
An abnormal condition exists in the printer, and the
printer cannot operate until the problem is corrected.
Once the operator removes the cause of the problem,
turning the printer off and on should restore the printer
to normal operation. Cover open.
Paper jams.
Ink cartridge out.
Ink cartridge missing.
Ink cartridge installed incorrectly.
Paper size error.
C
The printer can continue to print, but if the problem is
not corrected soon the printer will no longer be able to
operate. The operator must correct the problem as soon
as possible. Ink near end.
Ink collector unit near full.
Out-of-Range Temperature Errors
Printer Status at Error Status After Error
Power ON Power to the printer turns on, and
printer enters and remains in
standby mode. As soon as the temperature of the print heads
reaches the operational temperature range,
the printer enters the “Ready” mode.
During Printing Printer halts printing and enters the
standby mode. The printer remains in the “Standby” mode.
The operator must switch the printer off and on
again to restore normal operation.
Make sure that the room temperature is within the allowed range 10°C to 32°C (50°F to 89.6°F) with
RH 15% to 80%. For more details, see Section “1. Installation”.
4. Troubleshooting
160
4