Davin J012, Service Manual

Page: 186 / 365

7. Fold the printed sheet in half lengthwise as shown.
8. Hold the corner of the folded paper in front of a light and look at the cross-pattern overlapping the
single vertical line below.
9. Determine the 1st adjustment for the Read Direction.
• The adjustment value in the Read Direction is the difference between the single vertical line and
cross vertical line.
• If the difference is one calibration mark on the "+" side, for example, the adjustment is +1.0.
10. Unfold the paper then fold the sheet in half widthwise.
11. Determine the 2nd adjustment for the Feed Direction.
• The value read after folding the sheet widthwise is the adjustment value for the Feed Direction.
12. [

] or [

] > "Adjust" > [Yes]> "Tray1"
13. [  ] or [  ] > Select the tray ("Tray1", Tray2", "Bypass")> [Yes]
14. [  ] or [  ] > Select item to adjust ("Plain( ) ", "Plain(Y) ", "Glossy", "Transparency).
• The "Plain", "Glossy", and "Transparency" settings are provided because the sensor timing for
each is different.
• Select "Plain( )" to do the adjustment in the Read Direction (horizontal).
• Select "Plain (Y) to do an adjustment for the Feed Direction (vertical).
Adj=0
OK=Yes
15. [  ] or [  ] > Select the number for adjustment (-40 to +40)
Image Correction
185
4