Davin J012, Service Manual

Page: 27 / 365

2. Make sure the machine is never exposed to:
• Extreme changes from low to high temperature or high to low temperature.
• Cold or cool air directly from an air conditioner.
• Heat from a space heater.
3. Never install the machine in areas near:
• Dust, lint, or corrosive fumes.
• Strong vibration.
4. Do not use the machine at any location higher than 2,000 m (6,500 ft) above sea level.
5. Set up and use the machine on a sturdy, level surface.
• Place a carpenter's level on the machine front-to-back, and side-to-side and confirm that it is
level.
• Variations between the front/back and left/right level readings should be less than 2 degrees.
Minimum Space Requirements
No. Minimum Clearance Comments
1 120 mm (4.8 in.) Without Multi Bypass Tray
230 mm (9.1 in.) With Multi Bypass Tray
2 50 mm (2 in.) Applies to J012
1. Installation
26
1