Print head temperature sensor
was detected as abnormal when
the printer was turned on.
• Print head temperature sensor was detected as
abnormal when the printer was turned on
without the product number registered.
986
A
Humidity Sensor Abnormal
The printer detected that the
humidity sensor was abnormal.
• Sensor connector loose, damaged, or
defective.
• Sensor defective
987
A
Protection During Transport
At power on the printer detected
that the ink in a cartridge is non-
standard ink.
• Use only ink cartridges that are designed for
use with this printer.
• Never use re-filled ink cartridges.
988
A
Ink Supply Error (Air Sensor Abnormal)
Printer detected air sensor was
abnormal when suction was
applied 3 times when the printer
was powered on for the first time
for ink tank filling or print head
refreshing, but no air was
detected.
• Cycle the printer off and on and try again.
• If the problem persists, the print head air
sensors may be defective.
990
A
Ink Level Lever Position Error
The position of one or more ink
level levers could not be detected
at initial filling. Correct voltage
could not be created for
operation of the print head tank,
so the print heads cannot
operate.
• Ink level sensor defective
• Horizontal encoder film dirty, installed
incorrectly, broken
• Maintenance unit dirty, defective
• Ink nozzles clogged
992
A
Ink Collector Unit Full Error
At power on, the printer detected
that the left ink collector unit was
full.
• Replace the ink collector unit with a new tank.
• Never attempt to clean the old tank and
reinstall it.
• Obey the local laws and guidelines regarding
disposal of items such as the ink collector unit.
993
A
High Voltage Leak
SC Error Codes
163
4
Summary of Contents for J012
