Davin J012, Service Manual

Page: 251 / 365

For Future Use.
Moves the carriage in order to access the right air vent for cleaning.
5101 CARRIAGE CHANGE Set Printer in Carriage Replace Mode
Use this SP to reset the print head rank setting after print head replacement and to re-initialize
the initial filling counter.
Carriage Replacement
1. Enter the print head rank (wave) of
• Print head 1.
• Print head 2.
• Print head 3.
• Print head 4.
2. Enter the print head rank (voltage) of
• Print head 1.
• Print head 2.
• Print head 3.
• Print head 4.
Initial Fill Counter Reset
1. Turn the printer off.
2. After executing this menu, turn the printer on to start initial filling of the print head tanks.
3. After executing this menu, the carriage adjustment mode can be executed.
5102 CARRIAGE ADJUST Set Printer n Carriage Adjust Mode
Use this SP to adjust the print head gap after print head replacement and print the Nozzle Check
pattern.
Carriage Adjustment Mode Flow
Before executing this menu, you must execute the carriage replacement mode.
1. Print the print head gap adjustment chart (High Speed).
2. Adjust the gap (High Speed).
3. Print the print head gap adjustment chart (High Speed).
4. Print the print head gap adjustment chart (Std. (Speed Priority). Std. (Quality Priority)).
5. Adjust the gap (Std. (Quality Priority, Std. (Speed Priority)).
6. Print the print head gap adjustment chart (Std. (Speed Priority). Std. (Quality Priority)).
7. Print the print head gap adjustment chart (High Quality).
5. Service Tables
250
5