Menu/Menu Item
Function
• After the installation or troubleshooting session is completed,
switch this feature on again.
4 Language?
Allows selection of 1 of 10 languages. The selected language is used
for the menus, prompts, and messages on the operation panel display
of the machine.
Default: English
German, French, Italian, Dutch, Swedish, Norwegian, Danish,
Spanish, Portuguese
Note: A message prompts you to cycle the machine off/on. The
machine must by cycled off/on to enable the new setting.
5 Adjust Sound Vol?
The sound level can be adjusted for key presses, alerts, and speaker
volume during on-hook mode.
• Key. Adjusts the volume of the beep that sounds when a key is
pressed, or an original is loaded in the ARDF.
• Alert. Adjusts the volume of the beep that sounds when a
transmission error or other error occurs.
• Line Vol. Adjusts the volume of the speaker used during on-hook
mode with the fax.
6 Daylight-saving?
Switches the daylight saving time function on and off.
Default: On
The date and time for switching from standard time to daylight saving
time depends on which country is selected for "Country" under these
"System Settings". (See below.)
Note: This feature is not available in come countries.
7 Country?
Allows country selection.
Default: USA
The country selection automatically affects other settings such as
"Daylight-saving", "Print Fax Header", and "Auto Reset". For more
details, please refer to the Operating Instructions.
Note: A message prompts you to cycle the machine off/on. The
machine must by cycled off/on to enable the new setting.
8 Func. Priority?
Specifies the operation mode (Fax or Copy) immediately after the
machine is turned on and after the Auto Reset Time elapses.
Default: Copy
Display Summary
143
4
Summary of Contents for J012
